Hallöchen,
ich habe mal wieder was zusammengewürfelt
leider in english da ich nicht alles nochmals schreiben möchte...aber man erkennt um was es geht
here we go:
28cm of fish
i got 4 of them
130x70x70cm 630L
i siliconed 3 peaces of glass in one corner to install my filter...
top view...the filter foam will be squeezed in between the outer 90° angles...
the CZ- aifilter reactor will be on the inner part (towards you) and pump the water in the fish-part so the foam will be hold in place as the water flows throu
this will be my filter
with a glasscutter i cut all the glass i need (6mm) ii use petrol in combination during the cutting this makes the weel turn well and gives a clean cut also the breaking of the glass will be much easier!
with a Diamond layered foam pad i polish the sharp edges...best is to do that with water! watch your eyes...water keeps the tiny peaces in place or washes it away
